Shower/Bathtub converted to an 8 foot long shower.

​This project was just finished. This was a shower and bathtub (last picture) and we installed one 8 foot long shower. The shower water control valve was installed at the entrance (right wall), the shower head and shower wand are on the opposite (left) wall, it is from the manufacturer "SR SUNRISE". A niche was framed on the right wall and two shampoo shelves were installed on the left wall. The tiles are from Floor & Decor. The wall tiles are 23 inches wide by 47 inches in height. If you focus on the perimeter of the glass block and niche you will see that we used the "Schluter QUADEC" metal tile trims which we also used as a finish on the left and right wall tiles. The shower floor is zero transition (curbless) at the entrance however we did install a shower curb on the left side of the shower so a custom glass enclosure can be installed on it from a glass enclosure company. We installed a 72 inch long by 6 inch wide engineered stone slab on top of the shower curb, it's also from Floor & Decor. The shower floor has a linear drain on the center of the floor, the "Neodrain, 48 inch". We removed the bathroom window and we installed 8 inch by 8 inch glass blocks.